Cracking
Shrinkage, movement, and unsuitable layer design can concentrate stress as cementitious floors cure.
Industrial Flooring Solutions
Start with the Cause. Engineer the Complete Floor System.
DENAMEE connects substrate review, defect diagnosis, layer design, material selection, and application guidance so each recommendation reflects the real project condition.
Diagnose Before You Specify
Common Symptoms Often Point to Deeper System Issues
Floor defects can be influenced by substrate condition, water ratio, curing, interface preparation, layer thickness, and installation control. Project evidence should be reviewed before a material is specified.
Hollowing & Delamination
Weak interfaces or incomplete substrate preparation can reduce adhesion between the structural base and floor system.
Dusting & Sanding
Uncontrolled water ratios, curing, or surface density can leave conventional screeds friable under repeated traffic.
Uneven Surfaces
Manual placement across large floor plates can produce inconsistent levels that disrupt finishes and operations.
High Maintenance Costs
Recurring patching and surface repairs can interrupt facilities when the underlying floor build-up is not addressed.
Project Support Workflow
From Substrate Review to Handover Support
The workflow creates a shared technical basis for product selection and project communication. It does not replace project-specific structural review, installation controls, or applicable local standards.
- 01
Substrate Assessment
Review structural readiness, flatness, moisture, surface strength, contamination, and existing damage before selecting a system.
- 02
Floor Defect Diagnosis
Identify likely causes behind cracking, hollowing, dusting, unevenness, or recurring repairs instead of treating only visible symptoms.
- 03
System Recommendation
Match the substrate and operating environment with an appropriate leveling, transition, and finish combination.
- 04
Thickness & Layer Design
Confirm representative layer depths and transitions against height differences, finish requirements, and project constraints.
- 05
Material Selection
Select MC350, GQ300, HC250, or a coordinated system according to the agreed performance and application scope.
- 06
Installation Guidance
Align preparation, mixing ratios, placement controls, curing conditions, and key construction checkpoints with the order scope.
- 07
Grinding & Surface Finishing
Plan opening, staged grinding, repair, densification, polishing, sealing, and curing for systems that require a finished wear surface.
- 08
Inspection & Handover Support
Review agreed appearance, flatness, curing status, and documentation checkpoints before the floor enters service.
Final support scope is confirmed by project location, substrate condition, and order scope.
Solutions by Application
Matched to the Way Each Space Is Used
Typical combinations are shown for early-stage comparison. Final selection follows the project workflow above.
Industrial Factories & Workshops
The Challenge
Production floors face sustained foot and wheeled traffic, chemical exposure, and the need for a durable, easy-to-maintain surface.
Our Approach
MC350 colored finish flooring provides a seamless, wear-resistant surface, typically installed over an HC250 or GQ300 leveling base depending on substrate condition.
Logistics Warehouses
The Challenge
Large continuous floor areas require consistent flatness for racking systems and material-handling equipment, often across tight installation schedules.
Our Approach
HC250 corrects height differences and structural irregularities at depth, with MC350 or a specified finish system applied above for the trafficked surface.
Showrooms & Retail
The Challenge
Display environments demand a refined, seamless appearance without visible joints, in colors that align with brand or interior design requirements.
Our Approach
MC350's high-flow application achieves continuous flatness, with custom color systems available beyond the standard grey-lead palette.
Commercial Spaces & Offices
The Challenge
Commercial interiors need a durable base for finish materials such as tile, timber, or carpet, with reliable flatness across large floor plates.
Our Approach
GQ300 self-leveling mortar provides a precision base compatible with a wide range of finish flooring systems.
Schools & Educational Facilities
The Challenge
High-circulation corridors and classrooms require resilient, low-maintenance flooring that withstands daily institutional use.
Our Approach
GQ300 leveling paired with a specified finish system, or MC350 directly, depending on the trafficked-surface requirement.
Hospitals & Healthcare
The Challenge
Healthcare environments require hygienic, seamless surfaces that support cleaning protocols and reduce joint-related contamination risk.
Our Approach
MC350's seamless, high-flatness finish is suited to corridors and clinical-adjacent circulation areas, subject to project-specific hygiene specifications.
Parking Structures
The Challenge
Parking decks experience vehicle loads, height variance across structural bays, and exposure to abrasion from tires and turning traffic.
Our Approach
HC250 addresses deep leveling and structural correction, forming a stable base for parking-appropriate finish systems.
Renovation & Refurbishment
The Challenge
Existing floors with damage, cracking, or significant height loss need to be rebuilt before a new finish system can be installed.
Our Approach
HC250's thick-layer, crack-resistant formulation is designed for refurbishment applications at 20 mm and above.
Describe your project and we'll recommend a system
Every substrate is different. Share your project scope and our technical team will confirm the right combination of products for your application.
Start an Inquiry